Mise à jour de 'README.md'

This commit is contained in:
Th3maz1ng 2022-10-02 12:54:28 +02:00
parent 8bad8d5769
commit 9a3ec348bd

View File

@ -63,7 +63,7 @@ To do so, measure which voltage does the VCC pin of your Arduino board output an
Set **VOLTAGE_DIV_COEFF** to something different if you changed the voltage divider resistor values.
Set **RADIO_CHANNEL** to the NRF's RF channel (between 0 and 124). **Do not forget to set the receiver station up on the same channel**
Set **RADIO_CHANNEL** to the NRF's RF channel (between 0 and 125). **Do not forget to set the receiver station up on the same channel**
Set **RADIO_NODE_ADDRESS** to change it's 5 byte address if you feel like it. **Do not forget to set the receiver station up on the same address**
@ -86,23 +86,23 @@ Here is a list of the parts used to build the station with a link to where you c
***If you have any questions, do not hesitate to contact me at : bugreport[at]laposte[dot]net***
## Finally here are some pictures of the PCB and device :
PCB top view :
### PCB top view :
![](http://82.64.196.164/images/git/weather_station_pcb_top.jpg)
PCB back view :
### PCB back view :
![](http://82.64.196.164/images/git/weather_station_pcb_back.jpg)
Device's internals :
### Device's internals :
![](http://82.64.196.164/images/git/weather_station_open.jpg)
Device's internals with the PCB removed :
### Device's internals with the PCB removed :
![](http://82.64.196.164/images/git/weather_station_box.jpg)
Device form factor :
### Device form factor :
![](http://82.64.196.164/images/git/weather_station_top.jpg)
Device's LDR and solar panel :
### Device's LDR and solar panel :
![](http://82.64.196.164/images/git/weather_station_back_solar_panel.jpg)
Device's antenna and SHT/HTU 21 cover :
### Device's antenna and SHT/HTU 21 cover :
![](http://82.64.196.164/images/git/weather_station_front.jpg)