|
|
ee92fb6cdd
|
Finished to design the second version of the docking, it now has a USB micro connector and a cutout for the hearth rate sensor. STL file also available.
|
2023-09-27 00:54:41 +02:00 |
|
|
|
662881b128
|
Published the STLs ready to be 3D printed. The next version of the docking will come later...
|
2023-05-06 21:50:20 +02:00 |
|
|
|
2f9b654aa2
|
Removed backup FreeCAD files
|
2023-05-06 21:47:07 +02:00 |
|
|
|
a717c6b0d7
|
Finished the design of the new case and back cover, which is available in two versions : with Heart Rate Monitor or without. The docking station is still under design since I'd like to add a micro USB connector.
|
2023-05-06 21:36:56 +02:00 |
|
anschrammh
|
80321bba4e
|
Reworking the casing of the watch : shaved 1.75 mm of the height of the watch, reworking the back cover, work in progress
|
2023-05-03 22:57:11 +02:00 |
|
|
|
d4ad912239
|
Reworked the docking station size because the watch casing is slightly wider
|
2023-04-30 18:47:37 +02:00 |
|
|
|
2a67f76d70
|
Reworked the watch case as well as the back cover because I changed the vibration motor. I went from a 10 mm by 3 mm round motor to a 8 mm by 2 mm one.
|
2023-04-29 22:29:07 +02:00 |
|
|
|
10a98e3819
|
Reworked the space for the vibration motor
|
2023-04-22 22:46:04 +02:00 |
|
|
|
d78956f12b
|
Changed C12 capacitor value from 100nf to 68nf
|
2023-04-16 21:26:09 +02:00 |
|
|
|
30392415b8
|
Designed the first version of the watch case, watch back cover and watch docking station with FreeCAD.
|
2023-04-16 20:09:12 +02:00 |
|
anschrammh
|
d6882339fe
|
Minor change
|
2023-03-26 23:31:19 +02:00 |
|
anschrammh
|
408853788f
|
Minor changes : silkscreen update and minor rework
|
2023-03-08 08:03:17 +01:00 |
|
anschrammh
|
ee2dc8fb12
|
Reworked the 3V3 MCU trace design and added a few more vias - nothing major
|
2023-03-03 10:05:27 +01:00 |
|
|
|
a5d1c3dc49
|
Final PCB update for PCB version 1.0
|
2023-02-26 12:05:32 +01:00 |
|
anschrammh
|
c519ff7d37
|
Small change to the antenna no copper area
|
2023-02-23 06:21:12 +01:00 |
|
|
|
020f7e53b6
|
Changed physical orientation of the QMC5883L to have the X and Y axes aligned correctly plus minor reworks
|
2023-02-19 12:13:32 +01:00 |
|
|
|
1f5967b160
|
Reworked senter pad size of W800, reworked mounting pads of the molex battery connector, adjusted some traces. PCB Version 1.0.
|
2023-02-19 10:24:27 +01:00 |
|
anschrammh
|
9074cc0d7a
|
Minor update
|
2023-02-09 07:28:41 +01:00 |
|
anschrammh
|
6639221600
|
Updated BOM check marks
|
2023-02-09 07:26:10 +01:00 |
|
anschrammh
|
911229d771
|
Updated schematic (aligned gnd and dbg pads horizontally)
|
2023-02-09 07:25:52 +01:00 |
|
anschrammh
|
3bd1340879
|
Updated the PCB, reworked some parts of the silkscreen, exported last PCB design in PDF and gerber format
|
2023-02-08 07:38:53 +01:00 |
|
|
|
93c0ab97ec
|
Added BMA456 chip outline on silkscreen and checked spacing between outermost traces and board edge cut (should be at least 0.200 mm
|
2023-02-03 20:13:23 +01:00 |
|
|
|
431c16c492
|
Removed backup files added by mistake
|
2023-02-03 10:04:24 +01:00 |
|
anschrammh
|
16e5e51fe6
|
Added silkscreen to the PCB, updated gerber files and added the Bill of material in txt format.
|
2023-02-02 07:10:22 +01:00 |
|
anschrammh
|
7b76a6ff16
|
Added PCB fab file in gerber format and pdf. Did minor modification to the PCB
|
2023-01-30 00:33:53 +01:00 |
|
anschrammh
|
85ab884013
|
Added ESD protection diodes on the USB data lines and at the antenna input. Minor rework to the ground plane + small other things
|
2023-01-28 11:23:08 +01:00 |
|
anschrammh
|
e31fc57a12
|
Almost finished first routing attempt on a 2 layer board
|
2023-01-27 22:13:12 +01:00 |
|
anschrammh
|
8f26466cc4
|
Small correction to the schematic, started PCB routing and exported schematic in pdf format for quick viewing
|
2023-01-24 08:01:41 +01:00 |
|
anschrammh
|
b13c2d5459
|
Merge branch 'master' of http://82.64.196.164/git/Th3maz1ng/W800_Smart_Watch
|
2023-01-23 19:14:12 +01:00 |
|
|
|
541fb7cb53
|
Schematic continued, almost finished, a few things need still to be checked
|
2023-01-22 21:12:51 +01:00 |
|
anschrammh
|
f601058dce
|
Updated schematic, almost finished
|
2023-01-19 07:32:09 +01:00 |
|
anschrammh
|
eb1bdf32b1
|
Updated shcematic which is almost finished, need to add tp4056 charging and charge done interrupts + double check everything
|
2023-01-18 08:27:13 +01:00 |
|
|
|
88badff358
|
Worked on the schematic
|
2023-01-15 20:38:24 +01:00 |
|
|
|
4567ca8dd7
|
Schematic WIP
|
2023-01-15 10:41:37 +01:00 |
|
|
|
4c35e89876
|
Updated schematic, WIP
|
2023-01-14 14:48:38 +01:00 |
|
anschrammh
|
3171f23179
|
Added the design folder and started the schematic using Kicad
|
2023-01-11 23:12:51 +01:00 |
|
