Removed old screen documentation because it used the wrong serial interface, so it has been removed from the project.

documentation/Screen+touch screen resources/Driver/Display_Code_ST7789V.txt

@@ -1,102 +0,0 @@
-HW_Reset();                
-
-Delay(120);                
-
-Write(Command , 0x11);     
-
-Delay(120);                
-
-Write(Command , 0x36);     
-Write(Parameter , 0x00);   
-
-Write(Command , 0x3A);     
-Write(Parameter , 0x05);   
-
-Write(Command , 0xB2);     
-Write(Parameter , 0x0C);   
-Write(Parameter , 0x0C);   
-Write(Parameter , 0x00);   
-Write(Parameter , 0x33);   
-Write(Parameter , 0x33);   
-
-Write(Command , 0xB7);     
-Write(Parameter , 0x72);   
-
-Write(Command , 0xBB);     
-Write(Parameter , 0x3D);   //Vcom=1.625V
-
-Write(Command , 0xC2);     
-Write(Parameter , 0x01);   
-
-Write(Command , 0xC3);     
-Write(Parameter , 0x19);   //GVDD=4.8V 
-
-Write(Command , 0xC4);     
-Write(Parameter , 0x20);   //VDV, 0x20:0v
-
-Write(Command , 0xC6);     
-Write(Parameter , 0x0F);   //0x0F:60Hz        	
-
-Write(Command , 0xD0);     
-Write(Parameter , 0xA4);   
-Write(Parameter , 0xA1);   
-
-Write(Command , 0xE0);     
-Write(Parameter , 0x70);   
-Write(Parameter , 0x04);   
-Write(Parameter , 0x08);   
-Write(Parameter , 0x09);   
-Write(Parameter , 0x09);   
-Write(Parameter , 0x05);   
-Write(Parameter , 0x2A);   
-Write(Parameter , 0x33);   
-Write(Parameter , 0x41);   
-Write(Parameter , 0x07);   
-Write(Parameter , 0x13);   
-Write(Parameter , 0x13);   
-Write(Parameter , 0x29);   
-Write(Parameter , 0x2F);   
-
-Write(Command , 0xE1);     
-Write(Parameter , 0x70);   
-Write(Parameter , 0x03);   
-Write(Parameter , 0x09);   
-Write(Parameter , 0x0A);   
-Write(Parameter , 0x09);   
-Write(Parameter , 0x06);   
-Write(Parameter , 0x2B);   
-Write(Parameter , 0x34);   
-Write(Parameter , 0x41);   
-Write(Parameter , 0x07);   
-Write(Parameter , 0x12);   
-Write(Parameter , 0x14);   
-Write(Parameter , 0x28);   
-Write(Parameter , 0x2E);   
-
-
-Write(Command , 0x21); 
-
-Write(Command , 0x29);     
-
-    
-
-Write(Command , 0x2A);     //Column Address Set
-Write(Parameter , 0x00);   
-Write(Parameter , 0x00);   //0
-Write(Parameter , 0x00);   
-Write(Parameter , 0xEF);   //239
-
-Write(Command , 0x2B);     //Row Address Set
-Write(Parameter , 0x00);   
-Write(Parameter , 0x00);   //0
-Write(Parameter , 0x00);   
-Write(Parameter , 0xEF);   //239
-
-Write(Command , 0x2C);
-
-/*唤醒光圈,进入睡眠需要这样写
-Write(Command , 0x28); 
-Write(Command , 0x10); 
-Write(Command , 0xD6);     
-Write(Parameter , 0xA1); 
- */  

documentation/Screen+touch screen resources/HSD1.3+ST7789V_update.txt

@@ -1,102 +0,0 @@
-HW_Reset();                
-
-Delay(120);                
-
-Write(Command , 0x11);     
-
-Delay(120);                
-
-Write(Command , 0x36);     
-Write(Parameter , 0x00);   
-
-Write(Command , 0x3A);     
-Write(Parameter , 0x05);   
-
-Write(Command , 0xB2);     
-Write(Parameter , 0x0C);   
-Write(Parameter , 0x0C);   
-Write(Parameter , 0x00);   
-Write(Parameter , 0x33);   
-Write(Parameter , 0x33);   
-
-Write(Command , 0xB7);     
-Write(Parameter , 0x72);   
-
-Write(Command , 0xBB);     
-Write(Parameter , 0x3D);   //Vcom=1.625V
-
-Write(Command , 0xC2);     
-Write(Parameter , 0x01);   
-
-Write(Command , 0xC3);     
-Write(Parameter , 0x19);   //GVDD=4.8V 
-
-Write(Command , 0xC4);     
-Write(Parameter , 0x20);   //VDV, 0x20:0v
-
-Write(Command , 0xC6);     
-Write(Parameter , 0x0F);   //0x0F:60Hz        	
-
-Write(Command , 0xD0);     
-Write(Parameter , 0xA4);   
-Write(Parameter , 0xA1);   
-
-Write(Command , 0xE0);     
-Write(Parameter , 0x70);   
-Write(Parameter , 0x04);   
-Write(Parameter , 0x08);   
-Write(Parameter , 0x09);   
-Write(Parameter , 0x09);   
-Write(Parameter , 0x05);   
-Write(Parameter , 0x2A);   
-Write(Parameter , 0x33);   
-Write(Parameter , 0x41);   
-Write(Parameter , 0x07);   
-Write(Parameter , 0x13);   
-Write(Parameter , 0x13);   
-Write(Parameter , 0x29);   
-Write(Parameter , 0x2F);   
-
-Write(Command , 0xE1);     
-Write(Parameter , 0x70);   
-Write(Parameter , 0x03);   
-Write(Parameter , 0x09);   
-Write(Parameter , 0x0A);   
-Write(Parameter , 0x09);   
-Write(Parameter , 0x06);   
-Write(Parameter , 0x2B);   
-Write(Parameter , 0x34);   
-Write(Parameter , 0x41);   
-Write(Parameter , 0x07);   
-Write(Parameter , 0x12);   
-Write(Parameter , 0x14);   
-Write(Parameter , 0x28);   
-Write(Parameter , 0x2E);   
-
-
-Write(Command , 0x21); 
-
-Write(Command , 0x29);     
-
-    
-
-Write(Command , 0x2A);     //Column Address Set
-Write(Parameter , 0x00);   
-Write(Parameter , 0x00);   //0
-Write(Parameter , 0x00);   
-Write(Parameter , 0xEF);   //239
-
-Write(Command , 0x2B);     //Row Address Set
-Write(Parameter , 0x00);   
-Write(Parameter , 0x00);   //0
-Write(Parameter , 0x00);   
-Write(Parameter , 0xEF);   //239
-
-Write(Command , 0x2C);
-
-/*唤醒光圈,进入睡眠需要这样写
-Write(Command , 0x28); 
-Write(Command , 0x10); 
-Write(Command , 0xD6);     
-Write(Parameter , 0xA1); 
- */