From 82a0ac780329fd5f3791455b4374e67ce432d6cd Mon Sep 17 00:00:00 2001 From: anschrammh Date: Tue, 16 Jan 2024 13:14:30 +0100 Subject: [PATCH] Updated the to do and done list + added some new ideas and also the pin numbering in the pin assignement table... --- README.md | 75 +++++++++++++++++++++++++++++-------------------------- 1 file changed, 39 insertions(+), 36 deletions(-) diff --git a/README.md b/README.md index 5df57ea..4c8b021 100644 --- a/README.md +++ b/README.md @@ -145,39 +145,39 @@ using a magnetic 4 pin plug. ## MCU Pin assignement table : | Pin Number | Pin Name | Type | Function | Pull UP/DOWN| Connected to | Comment | |------------|----------|------|----------|-------------|--------------|---------| -||PB_20|I/O|**UART0_RX**/PWM1/UART1_CTS/I²C_SCL|U/D|**USB/Serial TX flash pin**|| -||PB_19|I/O|**UART0_TX**/PWM0/UART1_RTS/**I²C_SDA**|U/D|**USB/Serial RX flash pin** and **BMA456, Touch Panel, HMC5883L and BMP280 SDA pins**|| -||WAKEUP|I|**External Wake Up Pin**|D|**BMA456 IRQ 1 line** and **Touch Panel IRQ line** through NAND Gate|The chip is waken up when the pin is HIGH| -||RESET|I|Reset Pin|D|**Micro switch** and **USB/Serial RTS pin**|| -||XTAL_OUT|O|External crystal output|||| -||XTAL_IN|I|External crystal input|||| -||AVDD3V3|P|Chip power supply, 3.3V|||| -||ANT|I/O|RF Antenna|||| -||AVDD3V3|P|Chip power supply, 3.3V|||| -||AVDD3V3|P|Chip power supply, 3.3V||| -||AVDD3V3_AUX|P|Chip power supply, 3.3V|||| -||TEST|I|Test function configuration pin|||| -||BOOTMODE|**I/O**|BOOTMODE and I²S_MCLK/LSPI_CS/PWM2/I²S_DO|U/D|**Touch Panel Reset line**|| -||PA_1|I/O|JTAG_CK/**I²C_SCL**/PWM3/I²S_LRCK/ADC0|U/D|**BMA456, Touch Panel, HMC5883L and BMP280 SCL pins**|| -||PA_4|I/O|JTAG_SWO/I²C_SDA/PWM4/I²S_BCK/**ADC1**|U/D|**Battery resistor voltage divider output**|| -||PA_7|I/O|**PWM4**/LSPI_MOSI/I²S_MCK/I²S_DI/Touch0|U/D|**LCD backlight N-MOSFET driver**|| -||VDD3V3IO|P|IO power supply, 3.3V|||| -||PB_0|I/O|**PWM0**/LSPI_MISO/UART3_TX/PSRAM_CK/Touch3|U/D|**Vibration motor control pin**|| -||PB_1|**I/O**|PWM1/LSPI_CK/UART3_RX/PSRAM_CS/Touch4|U/D|**Touch Panel IRQ line**|| -||PB_2|I/O|PWM2/LSPI_CK/**UART2_TX**/PSRAM_D0/Touch5|U/D|**Debug UART serial output**|| -||PB_3|**I/O**|PWM3/LSPI_MISO/UART2_RX/PSRAM_D1/Touch6|U/D|**TP4056A Charging Signal**|| -||PB_4|**I/O**|LSPI_CS/UART2_RTS/UART4_TX/PSRAM_D2/Touch7|U/D|**TP4056A Charged Signal**|| -||PB_5|**I/O**|LSPI_MOSI/UART2_CTS/UART4_RX/PSRAM_D3/Touch8|U/D|**Battery resistor voltage divider enable**|| -||VDD3V3IO|P|IO power supply, 3.3V|||| -||CAP|I|External capacitor, 4.7µF|||| -||PB_6|I/O|UART1_TX/**MMC_CLK**/HSPI_CK/SDIO_CK/Touch9|U/D|**LCD Serial Clock Pin**|| -||PB_7|I/O|UART1_RX/**MMC_CMD**/HSPI_INT/SDIO_CMD/Touch10|U/D|**LCD Serial Data Pin**|| -||PB_8|**I/O**|I²S_BCK/MMC_D0/PWM_BREAK/SDIO_D0/Touch11|U/D|**LCD Data or Command Selection Pin**|| -||PB_9|**I/O**|I²S_LRCK/MMC_D1/HSPI_CS/SDIO_D1/Touch12|U/D|**LCD Reset Pin**|| -||PB_10|**I/O**|I²S_DI/MMC_D2/HSPI_DI/SDIO_D2|U/D|**LCD Chip Select Pin**|| -||VDD3V3IO|P|IO power supply, 3.3V|||| -||PB_11|**I/O**|I²S_DO/MMC_D3/HSPI_DO/SDIO_D3|U/D|**BMA456 IRQ 2 line**|| -||GND|P|Ground (Central Pad)|||| +|1|PB_20|I/O|**UART0_RX**/PWM1/UART1_CTS/I²C_SCL|U/D|**USB/Serial TX flash pin**|| +|2|PB_19|I/O|**UART0_TX**/PWM0/UART1_RTS/**I²C_SDA**|U/D|**USB/Serial RX flash pin** and **BMA456, Touch Panel, HMC5883L and BMP280 SDA pins**|| +|3|WAKEUP|I|**External Wake Up Pin**|D|**BMA456 IRQ 1 line** and **Touch Panel IRQ line** through NAND Gate|The chip is waken up when the pin is HIGH| +|4|RESET|I|Reset Pin|D|**Micro switch** and **USB/Serial RTS pin**|| +|5|XTAL_OUT|O|External crystal output|||| +|6|XTAL_IN|I|External crystal input|||| +|7|AVDD3V3|P|Chip power supply, 3.3V|||| +|8|ANT|I/O|RF Antenna|||| +|9|AVDD3V3|P|Chip power supply, 3.3V|||| +|10|AVDD3V3|P|Chip power supply, 3.3V||| +|11|AVDD3V3_AUX|P|Chip power supply, 3.3V|||| +|12|TEST|I|Test function configuration pin|||| +|13|BOOTMODE|**I/O**|BOOTMODE and I²S_MCLK/LSPI_CS/PWM2/I²S_DO|U/D|**Touch Panel Reset line**|| +|14|PA_1|I/O|JTAG_CK/**I²C_SCL**/PWM3/I²S_LRCK/ADC0|U/D|**BMA456, Touch Panel, HMC5883L and BMP280 SCL pins**|| +|15|PA_4|I/O|JTAG_SWO/I²C_SDA/PWM4/I²S_BCK/**ADC1**|U/D|**Battery resistor voltage divider output**|| +|16|PA_7|I/O|**PWM4**/LSPI_MOSI/I²S_MCK/I²S_DI/Touch0|U/D|**LCD backlight N-MOSFET driver**|| +|17|VDD3V3IO|P|IO power supply, 3.3V|||| +|18|PB_0|I/O|**PWM0**/LSPI_MISO/UART3_TX/PSRAM_CK/Touch3|U/D|**Vibration motor control pin**|| +|19|PB_1|**I/O**|PWM1/LSPI_CK/UART3_RX/PSRAM_CS/Touch4|U/D|**Touch Panel IRQ line**|| +|20|PB_2|I/O|PWM2/LSPI_CK/**UART2_TX**/PSRAM_D0/Touch5|U/D|**Debug UART serial output**|| +|21|PB_3|**I/O**|PWM3/LSPI_MISO/UART2_RX/PSRAM_D1/Touch6|U/D|**TP4056A Charging Signal**|| +|22|PB_4|**I/O**|LSPI_CS/UART2_RTS/UART4_TX/PSRAM_D2/Touch7|U/D|**TP4056A Charged Signal**|| +|23|PB_5|**I/O**|LSPI_MOSI/UART2_CTS/UART4_RX/PSRAM_D3/Touch8|U/D|**Battery resistor voltage divider enable**|| +|24|VDD3V3IO|P|IO power supply, 3.3V|||| +|25|CAP|I|External capacitor, 4.7µF|||| +|26|PB_6|I/O|UART1_TX/**MMC_CLK**/HSPI_CK/SDIO_CK/Touch9|U/D|**LCD Serial Clock Pin**|| +|27|PB_7|I/O|UART1_RX/**MMC_CMD**/HSPI_INT/SDIO_CMD/Touch10|U/D|**LCD Serial Data Pin**|| +|28|PB_8|**I/O**|I²S_BCK/MMC_D0/PWM_BREAK/SDIO_D0/Touch11|U/D|**LCD Data or Command Selection Pin**|| +|29|PB_9|**I/O**|I²S_LRCK/MMC_D1/HSPI_CS/SDIO_D1/Touch12|U/D|**LCD Reset Pin**|| +|30|PB_10|**I/O**|I²S_DI/MMC_D2/HSPI_DI/SDIO_D2|U/D|**LCD Chip Select Pin**|| +|31|VDD3V3IO|P|IO power supply, 3.3V|||| +|32|PB_11|**I/O**|I²S_DO/MMC_D3/HSPI_DO/SDIO_D3|U/D|**BMA456 IRQ 2 line**|| +|33|GND|P|Ground (Central Pad)|||| ## What is done/working so far - HARDWARE : @@ -220,8 +220,6 @@ using a magnetic 4 pin plug. ## **To Do list :** * Write the notification app listing all the received notification to be able to read them again or delete them if wanted. -* Improve the received notification design (colour and layout) as well as the AM or PM time when hour format is set to 12H. -* Call the GadgetBridge parser close notification when notification is closed. * Write a flash light app which sets the screen brightness to its maximum and sets a white background, be able to make it also flash with a red background. * Add a quick access drawer (like on android) to : @@ -230,7 +228,6 @@ sets a white background, be able to make it also flash with a red background. * open the flash light app * access the battery charge/discharge history app (to be written) * more if some ideas pop -* Update the altimeter app (add transistions when changing screens in the app) and port it to the watch. * Update the compass algorithm to also use the Z axis and not having to hold the watch flat. * Update the settings app to include a sensor category where calibration can be done for the magnetometer as well as for the temperature sensor to get more accurate temperature when the watch is worn. * Update the GadgetBridge parser to work with the latest version of GadgetBridge. @@ -242,6 +239,9 @@ sets a white background, be able to make it also flash with a red background. * Write an app to track step counts made every day. * Write an alarm app which set an RTC alarm to vibrate the watch. * Write a timer app with countdown and lap functionality. +* Implement a battery save mode activated on low batterie (ie >= 10 %) + * This mode would turn bluetooth off + * This mode would decrease the screen brightness (50 %) ## Done List : @@ -250,6 +250,7 @@ sets a white background, be able to make it also flash with a red background. * Total number of steps on the watch face. * A music player (works with GadgetBridge). * A compass app with temperature reading. + * An altimeter app. * The find my phone app (works with GadgetBridge). * A settings app to set : * Time and date @@ -264,6 +265,8 @@ sets a white background, be able to make it also flash with a red background. * Smooth screen changes with transitions. * Adaptative dynamic MCU clock speed to save power or have better visual performance. * Battery discharging, charging and charged status on the watch face. +* Improve the received notification design (colour and layout) as well as the AM or PM time when hour format is set to 12H. +* Call the GadgetBridge parser close notification when notification is closed. ## Achieved power consumption recap: