Th3maz1ng/TOSR-04
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Mise à jour de 'README.md'

Browse Source
This commit is contained in:
Th3maz1ng 2021-07-30 23:47:51 +02:00
parent 89a2c36e4c
commit 893c6492c8
1 changed files with 4 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
README.md
View File

@ -42,6 +42,10 @@ To be honest, the best way to flash our own firmware on this board is to replace
Indeed after looking at the reverse engineered schematic, the SPI pins needed for an ISP are not exposed (they are not even used...).<br />
Fortunately enough, the onboard FTDI seems to be connected with the DTR line which is connected through a capacitor to the ATMEGA's reset pin that is required by the Arduino bootloader.<br />
I will test it this weekend and keep you informed.
The test is done and IT WORKS !!!. I took an Arduino pro mini 3.3V 8MHz. I desoldered the ATMEGA328PU that was on it and soldered it back on the relay board.<br />
I then connected the board to the PC with a USB cable and started the Arduino IDE.<br />
In the tools menu of the IDE I chose the Arduino UNO board and I flashed the blink sketch.<br />
The download process worked and the led L (which is pin 13 luckily) started blinking as expected.<br />
## Could the onboard ATMEGA be saved ?
I will try to restore the chip to it's factory state by programming it with a HVPP (High Voltage Parallel Programmer) in order to reset the fuse bytes as well if they are set of course ...<br />