# ESP8266_swiss_army_board

Arduino based project running on my custom made board

## The hardware :

**The board :**
![](http://88.167.116.148/images/git/SAB_front.png)
![](http://88.167.116.148/images/git/SAB_back.png)

**The modules :**
![](http://88.167.116.148/images/git/SAB_cmp_mod.png)

### Hardware pin mapping :
![](http://88.167.116.148/images/git/ESP8266_pinout.png)
(This image wasn't done by me)

**So we have :**
* I2C (for OLED screen and RTC)
    * GPIO4 --> SDA
    * GPIO5 --> SCL
* SPI (for µSDCard)
    * GPIO13 --> MOSI
    * GPIO12 --> MISO
    * GPIO14 --> CLK
    * GPIO2 --> µSDCard CHIP_SELECT

## Here is a list of the components needed in order to build such a board :
* 1x 1N4001 reverse voltage protection diode
* 1x AMS1117 5v voltage regulator
* 1x AMS1117 3.3v voltage regulator
* 2x 22µf electrolytic capacitors
* 2x 0.1µf (code 104) tantalum capacitors
* 1x jumper
* 1x 2 pins male header
* 1x On/Off switch
* 2x push buttons
* 1x ESP8266 E12
* 1x 19 pins female header
* 1x 2 screws terminal
* 1x micro USB socket
* 1x 100 ohm resistor
* 2x 1k ohm resistor
* 1x 6.8k ohm resistor
* 1x 3.9k ohm resistor
* 1x 22k ohm resistor
* 2x 10k ohm resistor
* 1x 33k ohm resistor
* 1x 4.7k ohm resistor
* 1x 7cmx5cm pcb

## The software :

### I2C Hardware addresses :
* OLED screen : 0x3C
* RTC DS3231 : 0x68

### External librairies used :
* Adafruit_SSD1306 (not my work) [link](https://github.com/adafruit/Adafruit_SSD1306)
* Adafruit-GFX (not my work) [link](https://github.com/adafruit/Adafruit-GFX-Library)
* RTClib-master (not my work) [link](https://github.com/adafruit/RTClib)
* AT24CXX-master (not my work) [link](https://github.com/cyberp/AT24Cx)

### SD Card structure (subject to changes) :
```
/
|_CONFIG
|   AP.CFG
|   STA.CFG
|_FTP
|_LOGS
|_WWW
```
### Things to do :
* Screen Manager 	✓
* µSDcard File System
* RTC Manager 	✓
* RTC FLASH Manager
* FTP Service
* WEB Service
* GPIO Util